Maintenance
- Always clean the glass, steel or enamel parts with suitable non-abrasive or corrosive products. Avoid using Chlorine based products (Bleach etc.)
- Avoid leaving acid or alkaline substances on the working areas (eg., vinegar, salt, lemon, juice, etc.)
- The burner caps (mobile parts of the burners) must be washed frequently with hot water and detergent, taking care to remove every possible encrustation.
* Important: Always make sure that the gas is off before carrying out any cleaning operation.
Warnings
- Comply with the following instructions before remounting the parts,
- Check that the burner head and caps are not clogged by foreign bodies. (This may cause back fire)
- Check that the burner caps are correctly positioned on the burner heads. They must be sitting firmly